FALLER'S POLY PROMAX

Regular price$379.99 USD
Size: 28" - 30" Waist
Size & Fit
SizeWaistInseam
Small28–30″71–76 cm30"76 cm
Medium30–32″76–81 cm30"76 cm
Large34–36″86–91 cm30"76 cm
XL38–40″97–102 cm30"76 cm
XXL42–44″107–112 cm30"76 cm

Garment circumference measurements.

30-Day Risk-Free TrialMade in CanadaFree Shipping Over $400
  • 180° front + 4″ on the left side of each leg — 4″ above the crotch to the ankle
  • Six layers of Kevlar — the higher-protection build
  • 100% polyester shell with 360° stretch
  • Nylon-reinforced crotch, bar-tacked against blowouts
  • Handcrafted in Canada · 30-day field trial

From the field

Worn on real jobs

Real crews and creators putting this gear through real work.

Faller's Poly Pros — worn & reviewed
The faller's line, on the job

Why It's Built Different

Six-Layer Kevlar

Six layers of Kevlar cover the full front of each leg, plus 4″ up the left — from 4″ above the crotch to the ankle, more than the four-layer Poly Pro.

Built to Move

A 360° stretch polyester shell that bends with you all shift.

No Blowouts

The crotch is nylon-reinforced and bar-tacked at the stress points, where lesser pants split.

Kevlar where it counts

Most chainsaw pants protect the front of your thigh — down to the ankle, and that's it. Ours cover the full front of each leg — 180° — plus 4″ up the left side of each leg, from above the crotch to the ankle, right over the femoral artery where a kickback is deadliest. The Seismic ProMax adds a full 360° backpad.

FALLER'S POLY PROMAX Full front + 4″ left

Front
Back
180°
From above

Sewn in. Never shifts. The full front of each leg — 180° — plus 4″ up the left (bar) side, from above the crotch (dashed line) to the ankle. The dot marks the femoral artery: inside the coverage.

Typical competitor front pads only

Front
Back
FRONT ONLY
From above

Front-of-thigh pads, usually starting below the crotch (dashed zone) — the artery zone, the sides and the whole back stay exposed.

Loose inserts under jeans pads shift

Pads drift while you cut

Kevlar pads tucked under jeans move while you work — no fixed coverage where you need it.

Kevlar, sewn in Partial / unsecured No protectionCut protection reduces risk — no garment makes chainsaw work safe. Certified 3,600 / 4,100 TCS.

Specifications

TCS RatingTCS (Threshold Chain Speed) is the maximum chain speed a pant is certified to stop. A higher TCS rating means more protection.
Certified to stop a chain at 4,100 ft/min.
Protection
Full front + 4″ on the left side of each leg, 4″ above the crotch to the ankle.
Kevlar layers
6-layer
Shell
100% polyester — lightweight, all-season
Crotch
Nylon-reinforced, extra bar tacking
Fit
360° stretch
Origin
Handcrafted in British Columbia, Canada

Size & Fit

SizeWaistInseam
Small28–30″71–76 cm30"76 cm
Medium30–32″76–81 cm30"76 cm
Large34–36″86–91 cm30"76 cm
XL38–40″97–102 cm30"76 cm
XXL42–44″107–112 cm30"76 cm

Garment circumference measurements.

Frequently Asked Questions

How much of the leg does the Kevlar cover?
It wraps 240° around each leg — from 4 inches above the crotch all the way down to the ankle.
Where do saw pants usually fail, and how do these hold up?
The crotch. Ours is nylon-reinforced and bar-tacked at the seams that split first, so that's the part built to outlast the rest.
How is this different from the Poly Pro?
Same 240° wrap and polyester shell — but six layers of Kevlar instead of four, for the higher-protection build.