FALLER'S POLY PRO

Regular price$465.00 CAD
Size: 28" - 30" Waist
Size & Fit
SizeWaistInseam
Small28–30″71–76 cm30"76 cm
Medium30–32″76–81 cm30"76 cm
Large34–36″86–91 cm30"76 cm
XL38–40″97–102 cm30"76 cm
XXL42–44″107–112 cm30"76 cm

Garment circumference measurements.

30-Day Risk-Free TrialMade in CanadaFree Shipping Over $400
  • 180° front + 4″ on the left side of each leg, 4″ above the crotch to the ankle
  • Four layers of Kevlar protection
  • 100% polyester shell, light enough to climb in all day
  • Nylon-reinforced crotch, bar-tacked against blowouts
  • Handcrafted in Canada · 30-day field trial

From the field

Worn on real jobs

Real crews and creators putting this gear through real work.

barkersgardens_treeservice · new saw pants
New saw pants out of the box.
Faller's Poly Pros · worn & reviewed
The faller's line, on the job

Why It's Built Different

Kevlar Where It Counts

Four layers of Kevlar cover the full front of each leg, plus 4″ up the left, from 4″ above the crotch to the ankle.

Built to Move

A 360° stretch polyester shell that bends with you: up the trunk, on the ground, all shift.

No Blowouts

The crotch is nylon-reinforced and bar-tacked at the stress points, where lesser pants split.

Kevlar where it counts

Most chainsaw pants protect the front of your thigh, down to the ankle, and that's it. Ours cover the full front of each leg, 180°, plus 4″ up the left side of each leg, from above the crotch to the ankle, right over the femoral artery where a kickback is deadliest. The Seismic ProMax adds a full 360° backpad.

FALLER'S POLY PRO Full front + 4″ left

Front
Back
180°
From above

Sewn in. Never shifts. The full front of each leg, 180°, plus 4″ up the left (bar) side, from above the crotch (dashed line) to the ankle. The dot marks the femoral artery: inside the coverage.

Typical competitor front pads only

Front
Back
FRONT ONLY
From above

Front-of-thigh pads, usually starting below the crotch (dashed zone): the artery zone, the sides and the whole back stay exposed.

Loose inserts under jeans pads shift

Pads drift while you cut

Kevlar pads tucked under jeans move while you work: no fixed coverage where you need it.

Kevlar, sewn in Partial / unsecured No protectionCut protection reduces risk: no garment makes chainsaw work safe. Rated 3,600 / 4,100 TCS.

Specifications

TCS RatingTCS (Threshold Chain Speed) is the maximum chain speed a pant is rated to stop. A higher TCS rating means more protection.
Rated to stop a chain at 3,600 ft/min.
Protection
Full front + 4″ on the left side of each leg, 4″ above the crotch to the ankle.
Kevlar layers
4-layer
Shell
100% polyester, lightweight, all-season
Crotch
Nylon-reinforced, extra bar tacking
Fit
360° stretch
Origin
Handcrafted in British Columbia, Canada

Size & Fit

SizeWaistInseam
Small28–30″71–76 cm30"76 cm
Medium30–32″76–81 cm30"76 cm
Large34–36″86–91 cm30"76 cm
XL38–40″97–102 cm30"76 cm
XXL42–44″107–112 cm30"76 cm

Garment circumference measurements.

Frequently Asked Questions

How much of the leg does the Kevlar cover?
It covers the full front of each leg, 180°, plus 4 inches up the left (bar) side, sewn in, from above the crotch to the ankle.
Where do saw pants usually fail, and how do these hold up?
The crotch. Ours is nylon-reinforced and bar-tacked at the seams that split first, so that's the part built to outlast the rest.
Are they hot to work in?
The shell is 100% polyester with 360° stretch, light and breathable enough for all-season wear.